Supergen II - Publications

Work Package 1 (Related publications)

Hilson G., Hallam K.R. and Flewitt P.E.J., The Measurement of Stresses Within Oxides Produced on Austenitic and Ferritic Steels using Raman Spectroscopy, Materials Science Forum, 524-525, (pp. 957-962), 2006 (Presented at the 7^th European Conf. on Residual Stresses, Berlin, 2006)
Simandjuntak S., Ficquet X., Pavier M.J., Truman C.E. and Smith D.J., Residual Stress Measurement and Finite Element Mapping for a Welded P91 Pipe (submitted to 3^rd Int. Conf. on Integrity of High Temp. Welds, 24-26 April 2007, London)*
Constantinou P., Mellor P.H. and Wilcox P.D., Model of an Electromagnetic Vibration Generator, presented at the Universities Power Engineering Conference (UPEC), Newcastle, Northumbria University, 2006
Konstantinidis G., Drinkwater B.W. and Wilcox P.D., The Long-Term Stability of Guided Wave Structural Health Monitoring Systems, Smart Materials and Structures, 15(4), 967-976, 2006
Konstantinidis G., Drinkwater B.W. and Wilcox P.D., The Long-Term Stability of Guided Wave Structural Health Monitoring Systems (in press in IEEE Sensors)*
Drinkwater B.W., Konstantinidis G. and Wilcox P.D., The Long-Term Stability of Guided Wave Structural Health Monitoring Systems, in Annual Review of Progress in QNDE, eds. Chimenti D.E., Thompson D.O., Vol. 25B, 1702-1709, American Institute of Physics, Melville, New York, 2006
Wilcox P.D., Konstantinidis G. and Drinkwater B.W., Structural Health Monitoring Using Sparse Distributed Networks of Guided Wave Sensors, Proc. of SPIE Smart Structures and Materials 2006: Smart Structures and Integrated Systems, ed. Matsuzaki Y, Vol. 6173, 2006
Wilcox P.D., Konstantinidis G., Drinkwater B.W. and Croxford A.J., Strategies for Guided Wave Structural Health Monitoring (in press in Annual Review of Progress in QNDE, Vol. 26)*

Work Package 2 (Related publications)

Simms N.J., Kilgallon P.J. and Oakey J.E., Heat Exchanger Corrosion in Biomass and Coal Co-fired Power Plants, Presented at the COST Materials for Power Engineering 2006 Conf., Liege, Belgium (2006)
Simms N.J., Encinas-Oropesa A. and Nicholls J.E., Hot Corrosion of Coated and Uncoated Single Crystal Gas Turbine Materials, Presented at the EFC Workshop, 2006, Protective Systems for High Temperature Applications: From Theory to Industrial Implementation, Frankfurt, 12-13 October, 2006
Simms N.J., Kilgallon P.J. and Oakey J.E., Degradation of Heat Exchanger Materials under Biomass Co-firing Conditions’, Workshop on Materials Issues Governing the Performance of Advanced 21^st Century Energy Systems (2006)
Simms N.J., Heikinheimo L., Kilgallon P.J., Encinas-Oropesa A, Tuurna S. and Oakey J.E., Heat Exchanger Corrosion in Biomass and Coal Co-fired Power Plants, Eurocorr 2005 (2005)
Nicholls J.R., Simms N.J. and Encinas-Oropesa A., Modelling Hot Corrosion in Industrial Gas Turbines, Workshop on Materials Issues Governing the Performance of Advanced 21^st Century Energy Systems (2006)
Oakey J.E., Kilgallon P.J. and Simms N.J., Effects Of Biomass And Coal Co-Combustion On Degradation Of Heat Exchanger Materials, Presented at the EPRI International Conference on Advances in Condition and Remaining Life Assessment for Fossil Power Plants 2006, Louisville, Kentucky, October 2006

Work Package 3

Sanchez-Hanton J.J. and Thomson R.C., Characterization of Isothermally Aged Modified P91 (9Cr-1Mo-Nb-V) Steel by Electron Backscatter Diffraction, (submitted to Materials Science and Engineering A)*
Ogden S.L. and Thomson R.C., Microstructural Evolution in Coated Ni-Based Superalloys, Presented at the EFC Workshop, 2006, Protective Systems for High Temperature Applications: From Theory to Industrial Implementation, Frankfurt, 12-13 October, 2006
Sanchez-Hanton J.J. and Thomson R.C., The Effect of Initial Heat Treatment on Creep Behaviour of P91 Steels, Proceedings of the EPRI Int. Conf. on Advances in Condition and Remaining Life Assessment for Fossil Power Plants 2006, Louisville, Kentucky, October 2006
Sanchez-Hanton J.J. and Thomson R.C., Microstructural Characterization of High Chromium Power Plant Steel Welds (submitted to 3^rd Int. Conf. on Integrity of High Temp. Welds, 24-26 April 2007, London)*
Ogden S.L., Di Martino I., Oates D.L. and Thomson R.C., The Influence of Substrate Composition on the Microstructural Evolution and Performance of MCrAlY Coatings on Superalloys (submitted to 7^th Int. Charles Parsons Turbine Conf., Glasgow, 11-13 September, 2007)*
West G. and Thomson R.C., Microstructural Evolution in a 10CrMoVNbN Steel after Long Term Aging and Creep (submitted to 7^th Int. Charles Parsons Turbine Conf., Glasgow, 11-13 September, 2007)*
Zhang Y., Shipway P.H., Hyde T.H. and Sun W., Anisotropy Creep Behaviour of P91 Weld Metal - a Microstructural Study (submitted to 3^rd Int. Conf. on Integrity of High Temp. Welds, 24-26 April 2007 London)*

Work Package 4

Hyde T. H. and Sun W., A Study of Anisotropic Creep Behaviour of a 9CrMoNbV Weld Metal using Damage Analyses with a Unit Cell Model, Proc. IMechE Part L: J. of Materials: Design & Applications Vol. 219, No. 4, 193-206, 2006
Hyde T. H. and Sun W., Creep Failure Behaviour of a 9CrMoNbV Weld Metal with Anisotropy under a Biaxial Loading State, J. of Strain Analysis Vol. 41, No. 5, 369-380, 2006
Hyde T. H. and Sun W., Creep Failure Behaviour of a P91 Pipe Weldment with an Anisotropic Weld Metal under Iinternal Pressure and End Load (in press in Proc. IMechE Part L: J. of Materials: Design & Applications Vol. 220)*
Hyde T. H., Peravali S. and Leen S. B., The Effect of Weld Metal Anisotropy on the Creep of a Pressurised, Circumferentially Welded Pipe (Submitted to Proc. IMechE Part L: J. of Materials: Design & Applications, under review)*
Peravali S., Hyde T. H., Cliffe A. and Leen S. B., Development of an Anisotropic Damage Model for Creep of Welds (submitted to 3^rd Int. Conf. on Integrity of High Temp. Welds, 24-26 April 2007 London)*
Hyde T. H. and Sun W., Determining Creep Properties for Columnar and Equiaxed Regions of a 9CrMoNbV Weld Metal at 650^oC using Bulk Uniaxial Creep Test Data (submitted to 3^rd Int. Conf. on Integrity of High Temp. Welds, 24-26 April 2007 London)*

*Submitted/in press



Top of Page	Published by Power Generation Technology Centre. © Cranfield University. Tel: +44 (0) 1234 754038 Email: powergeneration@cranfield.ac.uk